HIND DEPENDENT HYDRAULIC CAR PARKING SYSTEM consists of two lateral supports rigidly grouted to the floor with anchor bolts on a levelled concrete floor. Two Hydraulic cylinders move via a common hoisting slider which are guided on the supports the platform. The synchronism of the Hydraulic cylinder during rising and lowering is equalized via change torsion wave. An automatic hydraulic lowering blocking to prevent unintentionally lowering as well as a catch hook acts as a safety device. It is also known as 2 post car parking system.
Features
- Can be installed in compact areas
- Only two hours required to install
- No special construction required for installation
- Silent in operation
- Operation Electrohydraulic
- Lift Height: 1600 to 2000 mm
- 24 Volt DC controls
- Control pendant can be conveniently located for remote operations. Key switch in control pendant
- Minimum operating & maintenance cost
- Hydraulic, Mechanical and Electrical safety devices included
- Easy to relocate & dismantle
- Platform lowering possible in case of power failure or any kind of emergency
- Maximum platform load Capacity-2000 kg
Specifications
- Drive: 2HP,1440 rpm, Motor,3 phase, 415 V, AC, 50 HZ (for 1 unit) 3HP, 1440 rpm, Motor,3 phase, 415 V, AC, 50 HZ (for 2 to 7 units)
- Platform Capacity: 2000 / 2200kg
- Lift Height: Up to 1700/ 1800/ 1900/ 2000mm
- Platform: Anti-skid Surface
- Useful Platform Width: 2000mm standard. Different optional
- Platform Length: 4500mm with ramps
- Hydraulic Power Pack: all enclosed power pack with pressure relief valve, 24V DC solenoid lowering Valve, Hydraulic Tank Capacity-16 litres (1 nos. unit), 40 litres (2 to 4 units), 60 litres (5 to 7 units)
- Mechanical Safety: Electro-magnetic lock, Car stopper, Barrier
- Hydraulic safety: Hose failure safety valve, pressure relief valve, 24 v DC solenoid coil for lowering, if power failure
- Electrical safety: Phase reversal, limit switch, key switch, Indicators
- Retrieval/ Parking time: 40 to 60 second
- Unit Weight: 1000 Kgs